A brief introduction of MRI Scan Machine

Magnetic Resonance Imaging (MRI) is a non-invasive imaging technique that creates comprehensive three-dimensional anatomy images. It's frequently used to detect diseases, diagnose them, and track their progress. It is based on cutting-edge technology that excites and detects changes in the rotational axis of protons in the water that makes up biological tissues. 

--------------Blog Contact Form-------------

Magnetic Resonance Imaging (MRI) uses powerful magnets to create a strong magnetic field that compels protons in the body to align with it. The protons are activated and spin out of equilibrium, straining against the magnetic field's pull, when a radiofrequency current is pulsed through the patient. The MRI sensors can detect the energy produced as the protons realign with the magnetic field when the radiofrequency field is switched off. The quantity of energy released and the time it takes for the protons to realign with the magnetic field vary depending on the environment and the chemical makeup of the molecules. On the basis of these magnetic properties, physicians can distinguish between distinct types of tissues. 

A patient is placed inside a huge magnet to obtain an MRI scan and must remain very motionless during the imaging process to avoid blurring the image. To accelerate the speed at which protons realign with the magnetic field, contrast medications (typically containing the element Gadolinium) may be given intravenously to a patient before or during the MRI. The brighter the image, the faster the protons realign.

Central Drugs Standard Control Organisation:

India is growing as one of the nation's leading in the pharmaceutical business and is among the top ten nations in terms of the pharmaceutical industry. Several factors such as the large population, growing health awareness, affordable medical facilities, and better research facilities have given rise to the manufacturing and development of pharma business in India. However, with the increasing scope for the growth of the pharma industry in India, there are possibilities for the sale/purchase of medical equipment & device illegally or without jurisdiction. Therefore, the Government of India has established the Central Drug Standards Control Organization (CDSCO), which is the primary legislative body and has been responsible for the regulation, control, and management of pharmaceuticals and medical devices in India apart from the appointment of the Drug Controller General of India (DCGI), and has conferred the responsibility of undertaking assessment, approval and regulation of further compliances(import, export, sale, distribution) in the matters of medicinal drugs and medical devices(including any existing or any new) drugs/devices in accordance with the provisions of the Drugs and Cosmetics Act 1940.

Consequently, To date, about 37 categories of medical devices have been regulated or notified as drugs under the Drugs & Cosmetics 1940. While the notified medical devices/equipment need to obtain registration for their manufacture or import in India, the medical devices that are not recognized need to obtain a NOC from the CDSCO.

What is a Medical Device?

According to the latest definition as provided under the Medical Devices Amendment rules 2020, as notified on 11.02.2020. However, taking care of circumstances the government has exercised its powers to include more categories by widening the scope of the definition of “Medical Device” under the Act. It states-

"Devices used in general medical practice such as medical apparatus, instruments, implants appliance, etc., which are either used individually or in combination, and are intended to be specifically applied for human beings or animals and are further intended to obtain the desired function by such means and for such purposes as provided below, but is not intended to meet the primary intended action on human body or animals by any pharmacological or immunological or metabolic means-  

• Analysis, prevention, observing, treatment, or mitigation of any disease or disorder;
• Analysis, observing, treatment, mitigation, or support for any injury or disability;
• Examination, replacement or alteration, or support in findings of the anatomy or a physiological process;
• For supporting or sustaining life;
• Decontamination of medical devices; and
• Conception-related equipment’s & devices.

Therefore, every manufacturer or importer or both of any medical devices in India shall be required to obtain registration as per the provisions of the Drugs and Cosmetics Act 1940. Any failure to comply with the same may invite legal action including penalty & prosecution under the Act.

Types of Medical Devices in India-

Provisions related to the import, manufacture, sale & distribution of medical devices are regulated under the provisions of the drug and cosmetics Act 1945. Under the New Medical Rules 2017, all medical devices have been classified into four different categories depending on their usability & risk involved as provided below. 

• Class A -Low-risk devices like a thermometer, tongue depressors, etc.
• Class B- Low moderate risk like Hypodermic Needles, suction equipment, etc.
• Class C- Moderate high-risk devices like Lung ventilators, etc.
• Class D- High-risk devices like Heart valves, implantable devices, etc.

Where Class A & B devices are considered to be less risky and moderate devices, for which the application to manufacture has to be filed to the State Licensing Authority. Whereas Class C &D are considered to be high and very High-risk devices and the application for these has to be filed to the Central Licensing Authority of India.

Eligibility Criteria for Medical Devices Registration/Import

The provisions related to activities such as Import, manufacture, sale and distribution of medical devices have been regulated under the provisions of the Drugs & Cosmetic Act 1940 & Rules 1945. Therefore, any person/firm/enterprise, etc. holding a wholesale drug license and/or manufacturing license issued under the Drugs and Cosmetics Act, 1940 and Rules 1945 could make an application for Registration and import of medical devices into India.

Process & Fee for Medical Devices Registration

Types of Medical Devices Registration

• Registration/Import of any existing medical device;
• Registration /import of any new medical device

Determine whether your medical device is under notified list or not

The CDSCO authority has provided a list of notified medical devices that need to compulsorily obtain registration under the Drugs and Cosmetics Act 1940 and in accordance with Medical devices rules 2017. However, there may be any medical devices that have not been expressly notified by the CDSCO authority, or in the case of new medical equipment, the manufacturer/importer shall be required to obtain a NOC in such cases. For instance, Blood Grouping Sera Ligatures, Sutures, Staples Intra-Uterine Devices (Cu-T), Condoms, Tubal Rings, Surgical Dressing, Umbilical Tapes, Blood / Blood Component Bags do not need registration, whereas devices such as spinal needles, cochlear implants, syringes, and needles, heart valves, endotracheal tubes and catheters among others should undergo registration provides with the CDSCO.

Appoint an Authorized representative (in case of a Foreign Entity)

For a foreign business manufacturer entity, it shall be necessary to appoint an authorized business entity in India, who shall be the contact person for the inspection authorities during the process, assist in device approvals, and registrations process, and vigilance adverse event reporting. The Indian Authorization should hold a wholesale drug license in forms 20B& 21B. 

Fill out the application form for Medical device Registration

In the next step, the manufacturer/importer for MD shall be required to submit the registration form of a regulatory dossier, along with all the prescribed documents along with the prescribed fee on the CDSCO portal to the DGCI (Drugs Controller General of India) by logging on to the online CDSCO portal https://cdsco.gov.in/opencms/opencms/en/Home/ and signing into the portal.

Following forms along with applicable govt. fees have been provided below, which shall be required to be paid through payment challan-

However, in the case of new equipment or medical device-

Further, each application shall be supported with the list of documents and the requisite fee as provided in the online portal of CDSCO-

Obtain Certificate of Registration in Prescribed form 

Once the application is submitted on the CDSCO portal, the DGCI registration authority may send a query through an inquiry letter to the manufacturer or from the authorized representative of the importer, along with the timeline within which the query should be answered, and sometimes, may also ask for a technical presentation On satisfaction the authority may issue a license in such form as provided in the above list. After obtaining registration, the manufacturer or his authorized representative may apply for an importer license.

Documents required to be attached

• Form 40
• ISO 13485 certificate
• Full Quality Assurance Certificate
• CE Design Certificate
• Undertaking that all information provided is authentic
• Either a Free Sale Certificate or Certificate from the Foreign Government 
• Certificate of Marketability from GHTF (Australia, Canada, Japan, the European Union, and the United States);
• Plant Master Report
• Device Master File

Time Involved &Validity for Registration

If the DGCI doesn’t ask for a Technical Presentation or Subject Expert Committee (SEC) audit, it takes around 6-9 months to obtain a Medical Devices Registration. In cases where Technical Presentation or Subject Expert Committee (SEC) audit, is required, it may take additional 3-6 months. 

Once obtained the Registration Certificate shall be valid for a total period of 3 years from the date of issue of registration unless suspended or canceled by the DGCI authority for proper causes.

Re-registration or Renewal of the Registration Certificate

The application for renewal of the MD registration certificate shall be made at least nine months from the expiry of the registration certificate. Though there are no additional requirements for the renewal of registration, it shall be necessary for the certificate holder to provide a copy of the Plant Master File (PMF) and Device Master File (DMF), where there are no changes in the PMF and DMF, 

Post-Compliances after receiving registration

Though there are not many compliances in place about the registration certificate, it shall be compulsory for the certificate holder to-

• In case of any change that has taken place about the constitution of the firm and/or address of the registered office/factory premises, the MD manufacturer/authorized representative of the importer to intimate the licensing authority regarding the same in writing;
• In case any such change has taken place, the existing registration certificate shall be valid for a maximum period of three months from the date on which the change has taken place, and during this time, the manufacturer/authorized representative shall be required to obtain a fresh Registration Certificate; 

How to register any new /additional medical device if Medical device registration obtained already?

In case an importer wants to obtain registration for manufacturing of any additional manufacturing device, then such person shall be required to obtain an endorsement to the existing Registration Certificate along with the prescribed documents holding that manufacturing of an additional device is being undertaken in the manufacturing site as provided in the registration certificate along with a fee of 1000 dollars fee for each additional device.